Vectric VCarve and Vectric Aspire

MASSO Post Processors for Vectric software


Post Processors for Version 11 software onward is available by directly downloading them into your Vectric software using the built in Post-Processor Management feature.





LASER Module

For those using the Vectric Laser module a post processor has been written and is available from the link below.

It can be used for both general machining and Laser and should be suitable for all versions of VCarve Pro and Aspire with the Laser module



Older software versions


INFORMATION: The post processors below should also work for Vectric Cut 2d.



  • Post Processors for Rotary Axis Vectric Aspire & VCave Pro all versions
  • CLICK HERE to download (Released: 01/11/2019)
  • Post Processors for Vectric Aspire and VCarve Pro V6.5
  • CLICK HERE to download (Released: 01/11/2019)
  • Post Processors for Vectric Aspire and VCarve Pro V7.5
  • CLICK HERE to download (Released: 01/11/2019)
  • Post Processors for Vectric Aspire and VCarve Pro V8.5
  • CLICK HERE to download (Released: 01/11/2019)
  • Post Processors for Vectric Aspire and VCarve Pro V9.5
  • CLICK HERE to download (Released: 01/11/2019)
  • Post Processors for Vectric Aspire and VCarve Pro V10.5
  • CLICK HERE to download (Released: 01/11/2019)
  • Post Processors for Vectric Cut 3D
  • CLICK HERE to download (Released: 01/11/2019)
  • Post Processors for Vectric PhotoVCarve
  • CLICK HERE to download (Released: 01/11/2019)