Release Date: 2 September 2020

https://docs.masso.com.au/wiring-and-setup/save-and-load-settings

NEW

• Major Change to Job/Work Zeroing in F2-Program & MDI Screen
  • Previously, the ZERO buttons in the F2-Program & MDI screen used G92 temporary work offsets.
  • In this update, the work offsets are now saved directly to the currently active work offset (e.g., G54, G55, etc.).
  • These values are now saved even after a power cycle for consistency.
• Probing System Overhaul
  • Previously, G92 temporary work offsets were used for probing, requiring users to manually click Set X, Y, or Z buttons.
  • In this update, probing data is automatically saved to the current work offset in use, streamlining the process.
• New Parking Position Feature
  • Users can now set and manage parking positions in the F4-Tools & Work Offset screen.
  • The system will first move the Z-axis (Z parking position) before moving the X and Y axes to the parking position.
  • Parking position can be triggered in multiple ways:
    • Clicking "Go to Parking Position" in the MDI window.
    • Pressing CTRL+ALT+P on the keyboard.
    • Assigning an input in the F1-Setup screen to "Go to Parking Position" (triggers when input goes HIGH).
    • Using the G30 command in MDI or G-code.
• 6 Inputs to Toggle AUX Outputs
  • Users can now configure 6 input signals in the F1-Setup screen to toggle any auxiliary outputs (1 to 6).
  • When an input goes HIGH, the assigned output is toggled.

IMPROVEMENTS & BUG FIXES

• Go to Work Origin Enhancement
  • The system now first moves the Z-axis up (home position) before moving the X and Y axes to job zero.
• Mill Linear Tool Changer (Type 2) Logic Fix
  • If "Tool Changer – Output 2" is not assigned as an output in the F1-Setup screen, the 6-second delay is now automatically ignored.
• Lathe Pragati Tool Changer Fix
  • Logic improvements to resolve tool change errors for better reliability.
• Probing Logic Enhancement
  • The part probing movement direction is now automatically adjusted based on the machine bed orientation setting (if X/Y is swapped).
• Plasma System Fixes & Enhancements
  • The Plasma Torch Hit signal is now automatically disabled before torch activation and re-enabled after starting the torch using the M3 command.
• Mill & Plasma Slaved Homing Fixes
  • Improved axis slaved homing logic to prevent one side of the gantry from losing sync during homing.
• Lathe, Mill, and Plasma Jogging Bug Fix
  • Fixed an issue that caused the system to ignore external JOG/RAPID commands.
  • This issue affected controllers up to 4-axis, but the 5-axis version was not impacted.
• UI Window Closing Bug Fix
  • Fixed an issue where some windows would remain stuck on the screen after closing.