Release Date: 2 September 2020

https://docs.masso.com.au/wiring-and-setup/save-and-load-settings

New Features

Major Change to Job / Work Zeroing (F2 – Program & MDI Screen)

• Previously, the ZERO buttons used G92 temporary work offsets.

• Work zero values are now saved directly to the active work offset (for example, G54, G55, etc.).

• These values are now retained after a power cycle.
   

Probing System Overhaul

• Previously, probing used G92 temporary work offsets and required manual Set X, Y, or Z selection.

• Probing data is now automatically saved to the active work offset.

• This simplifies setup and reduces user interaction.
   

New Parking Position Feature

• Parking positions can now be set and managed in the F4 – Tools & Work Offset screen.

Operation sequence:

• The Z-axis moves first to the Z parking position.

• The X and Y axes then move to the parking position.

Parking position can be triggered by:

• Clicking Go to Parking Position in the MDI window

• Pressing CTRL + ALT + P on the keyboard

• Assigning an input in the F1 – Setup screen to Go to Parking Position (triggered when input goes HIGH)

• Using the G30 command in MDI or a G-code file

Inputs to Toggle AUX Outputs

• Up to 6 input signals can now be configured in the F1 – Setup screen.

• Each input can toggle Auxiliary Outputs 1 to 6.

• When an input goes HIGH, the assigned output toggles state.

   

Improvements & Bug Fixes

Go to Work Origin Enhancement

• The system now moves the Z-axis up first (home position) before moving the X and Y axes to job zero.

• Improves clearance and operational safety.
   

Mill Linear Tool Changer (Type 2) Fix

• If Tool Changer – Output 2 is not assigned in the F1 – Setup screen, the 6-second delay is now automatically ignored.
   

Lathe Pragati Tool Changer Fix
 

• Improved tool change logic to resolve errors and improve reliability.
   

Probing Logic Enhancement
 

• Probing movement direction is now automatically adjusted based on machine bed orientation (when X/Y is swapped).
   

Plasma System Fixes & Enhancements

• The Plasma Torch Hit signal is now disabled before torch activation and re-enabled after starting the torch using M3.
   

Mill & Plasma Slaved Homing Fixes

• Improved slaved axis homing logic to prevent gantry sides from losing synchronisation during homing.
   

Lathe, Mill & Plasma Jogging Fix

• Fixed an issue where external JOG / RAPID commands were ignored.

• Affected controllers up to 4-axis only (5-axis was not impacted).
   

UI Window Closing Bug Fix

• Fixed an issue where some windows remained stuck on screen after closing.