Release Date: 19 Sep 2025
 

Update Process

1. Make a Backup of your machine settings
2. Save and print a copy of your Printable File for checking settings after the update.
3. Copy the software file to your flash drive inside the MASSO folder.

4. Repower your MASSO controller and access the software load screen:

     •  MASSO Touch: Tap the screen during startup

     • MASSO G3: Press F1 on the external keyboard

5. Select the new software version and press Enter.

6. Wait for the update to complete (approximately 45 seconds).

7. Press Escape to exit the software load screen.

8. Use your Printable File to check and correct settings if required.

    

The Update is complete.

Improvements & Bug fixes

OEM Logos

• Ensures OEM logos are correctly activated after software installation.

Input and Output State Settings

• Updated logic to ensure input and output invert settings are retained.

G-code Logic

• Ensures G30 G-code commands return the machine to the parking position in both Mill and Lathe software versions.

Navigation

• Back: Version 5.13

• Previous: Version 5.11