The Gcode generated by this wizard will start at the X Y start coordinate specified and machine from the inside towards the outside in a clockwise direction (Climb cut)

The step over for this wizard is fixed at 80%

These parameters are fixed in the wizard and cannot be changed.

Name

• This is what you give to describe your wizard and it will be displayed on the F5 conversational page

Tool No

• This is the tool number you will be using to machine the part.

Tool Diameter

• This is the diameter of the tool that will be used for this wizard

Spindle RPM

• The spindle speed required

Cutting feedrate

• The X & Y axis feed rate used for facing the material

Z Feedrate

• The feed rate used for the Z axis moves

Z Clearance

• The eight above the material that the Z axis uses when moving between cuts.

Depth of Cut

• The depth of cut used per pass.
• The number of passes used will depend on the difference in height between Z Start and Z End divided by the depth of cut.

X Center

• The X axis working coordinate center of the pocket

Y Center

• The Y axis working coordinate center of the pocket

Diameter

• This is the final inside diameter of the completed pocket

Z Start

• The Z axis Working coordinate where the machining will start machining
• This is typically the surface of the material

Z End

• The Z axis Working coordinate where the machining will stop machining
• This is the final height that you want the material to be

QR Code Help

• The QR code brings you to this page

Save

• This saves the changes to the wizard and returns you to the F5 conversational page.
• If there are missing parameters or incorrect incorrect it will specify the nature of the error and highlight the parameters that are causing the issue.

Cancel

• The cancels any changes made to the wizard and returns you to the F5 conversational page.

Tab

• For MASSO G3 users using an external keyboard the Tab key will step through the parameters one at a time reducing the need to use a mouse.