MASSO Documentation

Select Language

Mill Conversational Wizards

MASSO has built-in conversational wizards to easily generate gcode programs for basic machining operations by entering basic information.

List of wizards available for Milling Machines:

Face cut wizard
Profile cut wizard
Rectangular pocket wizard
Circular pocket wizard

Face cut wizard

Please be aware that when facing that material will be left on inside corners. This is due to cutters being round and are physically unable to remove material from an inside corner

To ensure that the corner material is removed the X & Y start and end points must be offset by a minimum of the cutter radius. This will give an overall larger cut area.

If you cannot make the cut area larger, using a smaller cutter will reduce the material left on the corners but will increase the cut time.

Tool step over is 100% of the tool diameter.