This page describes the User interface of MASSO G2 and MASSO G3 running version 3 software

The user interface is divided into 6 screens from F1 to F6, the below video explains each screen in detail.

INFORMATION: You can navigate between the screens by pressing keys F1 - F6 or by clicking the buttons at the bottom of the screen.

F1 Screen

This screen allows you to configure your Masso settings.

When you enter this screen you will be prompted for the Admin Password. Default Password is "HTG"
If you do not enter the password you will enter read only mode where you will not be able to make changes. Use CTRL+L if you want to reenter the password.

This is the Run screen where you run your GCode files and monitor progress.

When you enter this screen you will be prompted for the User Password. Default Password is "HTG". The user password can be changed or removed.
Use CTRL+L to lock the Screen and prevent unauthorized use.
The White box next to the Spindle CW is where you can enter your spindle speed. Type the desired speed into the box and press enter.
Click on the WiFi symbol to enter the WiFi configuration page.
Click the Axis Zero buttons to zero out an Axis DRO

This is the Jog Screen. From this screen you can Home and Jog your machine.

You can access MASSO probing functions by pressing the probing button on screen.
Press the Home Button for 3 seconds to home the machine
Jog and using the Axis + & - Buttons
Select continuous or step jog mode as well as step distance
Use the Slider to set continuous jog speed.
Click the Axis Zero buttons to zero out an Axis DRO

Tool Table, work offset screen and Park location.

This is where tool data is stored for each tool including it's name, Z offset and Tool Diameter.
Work offsets G54 to G59 are stored in the Work offset table. These values are automatically stored when you zero your axis and you can also manually change them if needed.
Double Click on a tool to change it's parameters as required
The Parking location coordinates are stored here.

Masso have built in wizards that will allow you to create basic Gcode files.

The wizards are intended for the most basic of jobs and CAM software is recommended.

This screen is where you will select files from your USB Flash drive and load them into MASSO.

Double click the file you wish to load or select the file and press the load key
Once the file loaded it will draw the toolpaths onto the screen for you to view.
If you do not wish to wait for the screen print to load or wish to cancel the selected file from loading press the Escape key
Right Click on a file name to see the file delete function