Regular updates are released to add more features to the units. Custom software's are also released for special client requirements. The software up-gradation process can be easily performed on site by following the instructions below:

The latest software version is available for download through your myWorkshop portal.

For the current version please see here: current-software-version

Information: Avoid using unbranded USB Flash drives as these are known to give issues with software install and upgrades

Information: It is advisable to make a backup of your settings before upgrading your software.

NOTE: For the below example the controller serial number will be 5A-660

WARNING: Check that while copying file from email the file name is not renamed and is exactly the file name you downloaded. example "00000660.HTG"

Summary of the install process

• Check that the file name matches the serial number of the controller.
• Connect a USB FLASH drive to your PC/MAC and make sure it's been formatted in FAT or FAT32 format and must use MBR as GPT is not supported.
• Copy all the files received in the software update email including "00000660.HTG" and Data1.HTG file to the root directory of the USB FLASH drive.
• When copying the files to the USB flash drive, please make sure that your email software does not download the files as ZIP file.
• Power off the controller.
• NOTE: Make sure that there is nothing connected on the PlayStation connector on the MASSO
• Insert the USB FLASH drive into the controller's USB flash drive connector and DO NOT connect a USB hub.
• Power up the controller and a progress bar will be displayed on the screen showing the upgrade status.
• Once the progress bar shows 100%, the upgrade process is finished, please power cycle the unit.