MASSO Documentation

Feed rate Override

Feed rate Override


Feed rate override function allows the feed rate to be changed during machining. The range is from 20% to 100% of the specified feedrate and the current feedrate percentage is shown on the screen.


Information: This feature is available on the F2 & F3 Screens.


Information: Feed rate override ranges from 20% to 100% of the specified Feed rate. Feed rate override cannot exceed 100%


How to use

  • Press the F11 Key on the keyboard
  • Use the + & - keys on your keyboard to to change the feedrate.
  • You can also use the Pendant to change the feedrate by rotating the MPG dial in either the + or - direction to increase or decrease the feedrate.


Feed rate Override set at 44%