MASSO Documentation

Setting up Lightburn

INFORMATION: Laser is only available in MASSO G3 and MASSO Touch software versions with the Multi-Head feature. This has not yet been released and subject to change.



What is Lightburn?


Lightburn is a software package designed to be used with Lasers of all types and can be used with CNC machines.

It has a free trial that allows you to test it with your machine before purchasing.

Lightburn


With Lightburn you can design, edit and create the Gcode which you can send to your MASSO CNC controller.

It is a very powerful software that can be used with Windows, Mac OS and Linux.


When you are happy that the software is what you want you will need to purchase a license for the GCode version of Lightburn software.


This document does not seek to teach you how to use Lightburn but how to set it up to use with MASSO.

It assumes that you are using a Diode Laser.


Configure Lightburn to use with MASSO

Completed General settings



  • Under the Basic settings tab select M8 for Air assist
  • Set the S-value max to 1000




Completed Basic settings




Completed Gcode Screen




Lightburn configuration is now complete.


Outputting Gcode

While there are many settings that you can use the steps above are the minimum needed to get up and running.

  • Once you have created your project select Save Gcode to output your file.
  • Remember to add .nc at the end of your file name
  • Ensure that you have selected GRBL-M3 (1.1e or earlier) for your device when saving to ensure it outputs the correct Gcode format. This is only a problem if you set up more than one device.
  • Ignore the disconnected message on screen as it only applies when the Laser is connected directly to Lightburn.




Overscanning