MASSO Documentation

Lubrication

Lubrication


An output can be assigned as lubrication to turn on a pump at set intervals to lubricate your machine.

The output will go High automatically at the specified interval for the specified duration.

Lubrication operates while the program is running and will stop when the machine is idle or in an EStop condition.


Configuration

In the F1 screen select Lubrication.

Fill in the Interval and the duration. In this example the output will go high every 7 minutes for 5 seconds.




The lubrication output can be assigned to any of the TTL outputs in the F1 screen.

  • Select the output you wish to use and double click with your mouse.
  • Select Lubrication form the list of outputs and double click with your mouse.
  • Your output is now assigned as lubrication.


Connect your lubrication pump to the TTL output using either the Masso relay module or other suitable interface module.



Lubricant Low alarm