MASSO Documentation

Hercus PC200 - 8 Tool Turret


Setting up the tool changer


  • Go to F1-Setup screen and open Tool Changer window.
  • From the list select Press enter to open Tool Changer list and select the the Hercus PC200 - 8 Tool Turret from the list.




Input Signals


Wire the sensor inputs and assign to MASSO as below:


  • Tool Changer - Input 1 for Tool 0 signal input (used to home the turret during machine homing).
  • Tool Changer - Input 2 for Tool counter signal input.
  • Tool Changer - Input 3 for Locking pin signal input.



Output Signals


Wire the control outputs and assign to MASSO as below:


  1. Tool Changer - Output 1 to rotate turret for tool change rotation.
  2. Tool Changer - Output 2 to rotate turret in tool lock direction.