Spanish 
French 
German 
Simplified Chinese G18 – ZX Plane Selection
The G18 command is used to set the current work plane to ZX.
G18 is a modal command and belongs to Group 2.
Syntax & Parameters
G18Example program
N10 G18
Explanation:
This command sets the system to use the ZX work plane.
The G18 command is used to set the current work plane to ZX.
G18 is a modal command and belongs to Group 2.
G18
N10 G18
Explanation:
This command sets the system to use the ZX work plane.
