Hypertherm 45, 65 & 85
How to wire the torch on/off signal of a Hypertherm Powermax 45, 65 or 85 to MASSO. MASSO switches the torch through a relay driven by one of its outputs.
Applies to
MASSO G3 and MASSO G3 Touch
You need
A relay, e.g. the MASSO Relay Module
Output function
Plasma On/Off Signal
Plasma on/off wiring
1
Wire the relay to one of the MASSO outputs and to the Hypertherm start signal, as shown above.
2
In the Outputs list, assign that output as Plasma On/Off Signal.
