Spanish 
French 
German 
Simplified Chinese MASSO Relay Module
MASSO 6 relay module provides optical isolation to high voltage/current signals from MASSO controller.
The Relay module is designed to work with the ES, Spindle control pins 2 & 3 and all TTL outputs of MASSO which have an operating voltage range of 2.2 to 5 volts.
If powering the relay module from a separate power supply you must common the -ve of the relay power supply to the -ve of the MASSO power supply or repays will not operate.
- Multi color LED's for each relay helps easily troubleshoot issues.
- Green color LED indicates that a signal is received to switch on the relay and the relay has been switched on.
- Red color LED indicates that a signal to switch on the relay has been received but the relay has failed and not working.
- Each relay can be used to control 5 Amp 28VDC or 5 Amp 240VAC load.
- Works with a single 24VDC power supply.
- Board dimensions: 95mm (3.74 inch) x 25mm (0.98 inch)
CAUTION: Connecting the power polarity in reverse will damage the relay module.
INFORMATION: Ordering MASSO relay module CLICK HERE
Green LED indicating relay ON
Red LED indicating relay failed
Wiring example
Mounting and Mechanical Data
