Loading & Running G-Code

MASSO runs gcode files directly from the USB Flash drive. Please see the below video for instructions on how to load and run gcode files.

Files with extensions .nc, .cnc, .tap, .wiz, .txt, .eia are displayed in the F6 - Load File screen.

Gcode files as big as 4GB can be run on controller.

If you are loading a very large Gcode and do not want to wait for the toolpath preview to be displayed you can press the Escape button on screen or the ESC key on the keyboard to cancel the preview.

Gcode files can also be transferred wirelessly using WiFi connection and transferring files from PC using the MASSO Link software.

WARNING: After loading your Gcode file you must press the Rewind button before pressing Cycle Start to run your program.