Lubrication

An output can be assigned as Lubrication to control a pump at set intervals to lubricate your machine.

The output will automatically go HIGH at the specified interval for the set duration.

Lubrication operates only while a program is running and will stop when the machine is idle or in an E-Stop condition.

Configuration

• Go to the F1 screen
• Select   Lubrication

• Enter the Interval and Duration

   

Example: The output will go HIGH every 10 minutes for 3 seconds.

The lubrication output can be assigned to any TTL output in the F1 screen:

1. Select the desired output
2. Double-click to open the options
3. Select Lubrication from the list
4. Double-click to confirm

The output is now assigned as lubrication.

Connect the lubrication pump to the TTL output using the MASSO Relay Module or another suitable interface module.

Lubricant Low Alarm

If your lubricant reservoir has an alarm output, it can be connected to MASSO.

When triggered, a lubrication alarm will be displayed on MASSO.

Refill the lubricant reservoir, and the alarm will automatically clear.