MASSO Documentation

Plasma - Torch Height Control

MASSO supports simple control signals for torch heigh control so that external THC's can be easily integraded with MASSO.


Input signals used for THC:


  • THC Input - 1 - is used to tell MASSO to move the Z axis up. When this input goies HIGH, MASSO will start moving the Z axis up.
  • THC Input - 2 - is used to tell MASSO to move the Z axis down. When this input goies HIGH, MASSO will start moving the Z axis down.
  • Plasma Arc OK Signal - This signal is required to tell MASSO that the arc has been successful. This signal should go HIGH by the THC on successful arc start.