To make it easy for setting up machines in production or to save machine calibration profiles, all machine calibration and setup settings can be saved to file on the USB Flash drive. These settings can then be loaded to other MASSO controllers to quickly and easily finish the machine setup process.
INFORMATION: When the settings are saved to file, the WiFi network Security Key is not saved and is set as blank in the settings file for security reasons.
Saving settings to file
Go to the F1-Setup screen and open the Save & Load Calibration Settings window. Click the Save to file button and all calibration and setup settings will be saved to MASSO_Settings.htg and tool table MASSO_Tools.htg on to the USB Flash drive.
Loading settings from file
Go to the F1-Setup screen and open the Save & Load Calibration Settings window. Click the Load from file button and all calibration and setup settings will be loaded from the MASSO_Settings.htg file and tool table settings from the MASSO_Tools.htg file on the USB Flash drive.
CAUTION: Please restart MASSO after loading settings from USB Flash drive so that the settings can take effect.
INFORMATION: Loading the tool table MASSO_Tools.htg is optional and does not need to be present to load the settings.