Feed rate override

Feed rate override function allows the feed rate to be changed during machining. The range is from 20 to 100% of the specified feed rate and the current feed rate percentage is shown on the screen.

Information: This feature is available on the F2 & F3 Screens.

Information: The current Beta software version allows a Feed Rate override of 20 to 150%

How to use

• Press the F11 Key on the keyboard
• Use the + & - keys on your keyboard to change the feed rate.
• You can also use the Pendant to change the feed rate by rotating the MPG dial in either the + or - direction to increase or decrease the feed rate.

Feed rate Override set at 100%

MASSO G3 and MASSO Touch

• In addition to the methods above the MASSO G3 and MASSO Touch has an Overrides tab in the Gcode window
• The Feed override slider that can be used to change the feed rate between 20% & 100%.
• Moving the slider will adjust the feed rate in real time while you are machining.
• The Reset button will reset Feed to 100%